济南向前汽车配件有限公司
3

济南向前汽车配件有限公司

微信号:18660103049

陕汽,重汽配件,工程机械,电子产品,汽车发动机系统,汽车滤清器,汽车横向件,豪沃发动机总成汽车检修设备及工具,传动系统,汽车灯具,驱动系统,商用车,制动系统,转向系统,车...

新闻中心
产品分类
站内搜索
 
荣誉资质
友情链接
您当前的位置:首页 » 供应产品 » DZ95319470007 中间摇臂总成
DZ95319470007 中间摇臂总成
产品: Middle rocker arm assembly
图号: DZ95319470007
车型: SHACMAN 8*4
品牌: Forward
Weight: 5.06kg
单价: 面议
最小起订量:
供货总量:
发货期限: 自买家付款之日起 3 天内发货
有效期至: 长期有效
最后更新: 2021-02-22 16:01
最新关注: 16
如果您对我们的产品感兴趣,可以点击下面的询价填写询价单,我们会对此询价单有额外的优惠.
详细信息
DZ95319470007  中间摇臂总成/DZ95319470007DZ95319470007  中间摇臂总成/DZ95319470007DZ95319470007  中间摇臂总成/DZ95319470007
 Car steering gear transmission clearance T with the size of the steering wheel Angle changes. Straight line driving,
steering gear transmission pair if there is a transmission clearance, once the steering wheel by the lateral force, can be in the clearance T range,
allow the wheel to deviate from the original driving position, so that the car lose stability. In order to prevent this situation,
the transmission clearance of the transmission pair is required when the steering wheel is in the middle and near the position (generally 10°--15°) to be minimal, and it is best to have no clearance.

The wear of steering gear transmission pair in the middle and its vicinity is greater than that at both ends. When the gap
caused by wear near the middle position is too large to ensure the stability of straight line driving, the gap must be readjusted and eliminated.
For this purpose, the end of the steering rocker arm shaft adopts the T groove to install the adjustment screw to adjust the gap. After adjusting the gap,
the steering wheel can be rotated from the middle position to both ends without sticking. For this reason, the transmission clearance characteristics of the
transmission pair should be designed as a gradually increasing shape after leaving the middle position.
DZ95319430070-转向助力缸总成(Φ70)外径82mm

 
在线服务点击这里给我发消息
电话:0531-68827106
手机:18705311600
微信:18660103049